The quickest way to get the right part first time is the number on your old part. Vehicles of the same model and year can use different parts, especially when there was a mid-year update or the vehicle was built in more than one factory.
Where to look
- Injectors: the number is printed or laser-etched on the injector body, often near the electrical connector or on the top. You may need to clean off grime to read it. Don't confuse it with the correction code. See Injector coding and calibration explained.
- Turbochargers: look for a metal tag or label riveted to the compressor housing or the bearing housing. It usually shows the turbo maker's part number and may also show the vehicle maker's number.
- High-pressure fuel pumps: a label or stamping on the pump body.
- Suction control valves and metering valves: a number on the valve body or connector. On some pumps you need to remove the valve to read it.
- Sensors: a number moulded or printed on the sensor body.
Other numbers that help
- Engine code: for example 1KD-FTV, 4JJ1 or YD25. It is usually stamped on the engine block and listed in your service records.
- VIN and build date: on the build plate or compliance plate, and on your registration papers.
- Vehicle maker's (OE) part number: printed on invoices from a dealer or workshop that has worked on the vehicle.
Searching our catalogue
Type the number into our part search, with or without dashes and spaces. We match manufacturer numbers, vehicle-maker (OE) numbers and alternate numbers, and we show every number we know for a part on its product page. You can also browse by make, engine or part type.
Can't find a number?
Send us a clear photo of the old part and its label, plus your engine code and VIN, and we'll help you match it. See our contact page.
